SATA Channels on the Intel ICH8R work fine, the Silicon Image controller doesn't seem to be reliable.
LM Sensors doesn't work at all.
The Realtek Ethernet MACs require the 2.6.19 kernel or higher.
Abit slightly overclocks this board with their default settings which confuses the speed control module in the kernel. If you use their default settings (2.72GHz for the 2.66GHz E6700) it will report available frequencies as 1GHz, 800MHz, 600MHz. If you set the clock down to the proper frequency then the reported available frequencies will be correct.
Post License:
GNU LGPL
LM Sensors doesn't work at all.
The Realtek Ethernet MACs require the 2.6.19 kernel or higher.
Abit slightly overclocks this board with their default settings which confuses the speed control module in the kernel. If you use their default settings (2.72GHz for the 2.66GHz E6700) it will report available frequencies as 1GHz, 800MHz, 600MHz. If you set the clock down to the proper frequency then the reported available frequencies will be correct.